LPC2368FBD100,551 is a high-performance 16/32-bit microcontroller (MCU) based on the ARM7TDMI-S core, developed by NXP. It adopts the LQFP-100 (14x14mm) surface mount packaging. This chip is one of the flagship models in the LPC2300 series. Due to its rich peripheral integration, it has been widely used in embedded applications such as industrial control and communication gateways.
This chip operates at a frequency of up to 72 MHz and integrates up to 512KB Flash and 58KB SRAM, featuring powerful processing and storage capabilities. Its peripheral resources are extremely abundant, including Ethernet MAC, USB 2.0 device, CAN 2.0B interface, as well as multiple UART, I2C and SPI communication interfaces.
Features ：
• CPU core: ARM7TDMI-S 16/32-bit RISC processor, with a maximum clock speed of 72 MHz.
• Storage resources: 512KB Flash + 58KB SRAM, supports ISP/IAP programming
• Operating voltage: 3.0V ~ 3.6V, single power supply
• Communication interface: Ethernet MAC, USB 2.0, 2x CAN 2.0B, 4x UART, 3x I2C, 3x SSP/SPI, I2S, SD/MMC card interface
• Simulated peripheral devices: 6-channel 12-bit ADC, 1-channel 10-bit DAC
• Timer resources: 4x 32-bit general-purpose timers, 1x motor control PWM, 1x standard PWM, RTC, watchdog timer
• I/O Port: Up to 70 GPIO pins, with configurable pull-up/pull-down resistors
• DMA controller: General DMA Controller (GPDMA)
• Debugging interface: Standard JTAG interface, supporting embedded tracking
• Low power mode: Idle, sleep, power-off and deep power-off modes
• Wide operating temperature range: Industrial grade -40°C to +85°C
• Package type: LQFP-100 (14x14mm), pin pitch 0.5mm
• MSL level: Level-3 (168 hours)
• Environmental compliance: Meets RoHS standards, lead-free (Pb-Free)
Application：
• Industrial Control and Automation: PLC, Factory Automation Equipment, Process Control Systems
• Communication Gateway: Protocol Converter, Remote Monitoring Terminal, Industrial Ethernet Gateway
• Medical equipment: Portable medical diagnostic and monitoring devices
• POS terminal: Cashier system, payment terminal
• Automotive Electronics: Vehicle Information Entertainment, Remote Information Processing
